# Default configuration file for SExtractor 2.3
# EB 2003-07-10
#
 
#-------------------------------- Catalog ------------------------------------
 
CATALOG_NAME    testJ.cat        # name of the output catalog
CATALOG_TYPE    ASCII_HEAD      # "NONE","ASCII_HEAD","ASCII","FITS_1.0"
                                # or "FITS_LDAC"
 
PARAMETERS_NAME 1030.param   # name of the file containing catalog contents
 
#------------------------------- Extraction ----------------------------------
 
DETECT_TYPE     CCD             # "CCD" or "PHOTO"
FLAG_IMAGE      flag.fits       # filename for an input FLAG-image
DETECT_MINAREA  5               # minimum number of pixels above threshold
THRESH_TYPE  	RELATIVE
DETECT_THRESH   1.6            # <sigmas> or <threshold>,<ZP> in mag.arcsec-2
ANALYSIS_THRESH 1.6            # <sigmas> or <threshold>,<ZP> in mag.arcsec-2
 
FILTER          Y               # apply filter for detection ("Y" or "N")?
FILTER_NAME     gauss_3.0_7x7.conv    # name of the file containing the filter
 
DEBLEND_NTHRESH 32              # Number of deblending sub-thresholds
DEBLEND_MINCONT 0.005           # Minimum contrast parameter for deblending
 
CLEAN           Y               # Clean spurious detections? (Y or N)?
CLEAN_PARAM     1.0             # Cleaning efficiency
 
MASK_TYPE       CORRECT         # type of detection MASKing: can be one of
                                # "NONE", "BLANK" or "CORRECT"
 
#------------------------------ Photometry -----------------------------------
 
PHOT_APERTURES  3.75,4.5,4.9,5.0,5.1,5.25,5.5,5.6,6.0,6.7,7.5,9.4
				# MAG_APER aperture diameter(s) in pixels
PHOT_AUTOPARAMS 2.5, 3.5        # MAG_AUTO parameters: <Kron_fact>,<min_radius>
 
SATUR_LEVEL     340.0           # level (in ADUs) at which arises saturation
 
MAG_ZEROPOINT   23.286          # AB magnitude zero-point C/S image
MAG_GAMMA       4.0             # gamma of emulsion (for photographic scans)
GAIN            172380.         # detector gain in e-/ADU
PIXEL_SCALE     0.267           # size of pixel in arcsec (0=use FITS WCS info)
 
#------------------------- Star/Galaxy Separation ----------------------------
 
SEEING_FWHM     0.9             # stellar FWHM in arcsec
STARNNW_NAME    /data/marlow/quadri/bin/sextractor-2.3/config/default.nnw     
# Neural-Network_Weight table filename
 
#------------------------------ Background -----------------------------------
 
BACK_SIZE       64            # Background mesh: <size> or <width>,<height>
BACK_FILTERSIZE 3               # Background filter: <size> or <width>,<height>
 
BACKPHOTO_TYPE  GLOBAL          # can be "GLOBAL" or "LOCAL"
 
#------------------------------ Check Image ----------------------------------
    
CHECKIMAGE_TYPE NONE		# can be one of "NONE", "BACKGROUND",
                                # "MINIBACKGROUND", "-BACKGROUND", "OBJECTS",
                                # "-OBJECTS", "SEGMENTATION", "APERTURES",
                                # or "FILTERED"
CHECKIMAGE_NAME segK.fits      
				# Filename for the check-image
 
#--------------------- Memory (change with caution!) -------------------------
 
MEMORY_OBJSTACK 3000            # number of objects in stack
MEMORY_PIXSTACK 300000          # number of pixels in stack
MEMORY_BUFSIZE  1024            # number of lines in buffer
 
#----------------------------- Miscellaneous ---------------------------------
 
VERBOSE_TYPE    NORMAL          # can be "QUIET", "NORMAL" or "FULL"